1、 Name of product ：
Nonpinhole & self fluxing Polyurethane enamelled round coper
wires class 180.
2、 Type：
QA-1/180(thin) thin to paint membrane have needle hole , person who
weld polyester paint make copper coin line direct
QA-2/180(thick) thin to paint membrane have needle hole , person
who weld polyester paint make copper coin line direct
3、 Specification range
0.100~1.000mm
4、 The characteristic of the products and scope of application
This product has higher hot grade, needn't get rid of and paint the
membrane , very direct soldering tin , it is convenient to operate,
raise the efficiency, there is no hole of the saline infusion
needle, especially suitable for pressing various kinds of windings
of electrical machineries , electric apparatuses , instruments of
the standard manufacture of JIS.
5、 Carry out the standard
GB6109.1—90 GB6109.4—85
Customer's standard
6、 Main performance index
Elongation25%
Spring Back ＜55°
breakdown voltage ＞4KV
Soldering tin Soak in temperature 375±5℃ 2S Or soak in temperature
450±10℃ 4S
Hole of the saline infusion needle DC12V 1min ＜1/5m
The surface grits coefficient ≤0.08 |
| Name of product ：
Corona-proof enamelled round copper wires class 200.
2、Type：
QNY-1/200(thin) thin to paint membrane able to bear corona paint
make the copper coin money
QNY-2/200(thick) thin to paint membrane able to bear corona paint
make the copper coin money
QNY-3/200(special) special paste paint membrane able to bear corona
paint make the copper coin money
3、 Specification range：
0.20~2.50cm
4、 The characteristic of the products and scope of application
Well able to bear corona performance with able to bear solvents ,
able to bear refrigerant performance finelying, under the
high-frequency pulse condition, life-span index ?Y 10. Especially
suitable for frequency conversion and control the motor winding
under the terms, frequency conversion refrigerator, frequency
conversion air conditioner compress the electromechanical winding,
and other electrical machineries with the same demand, the windings
of the power , instrument.
5、 Carry out the standard
GB6109.1—90
GB6109.11—90
Q/zlxj001—2001
Customer's standard
6、 Main performance index
Elongation≥25%
Spring Back ≤55°
Heat Shock220℃ 30min 2dDo not split
Cut through 340℃ 3min Do not wear
Able to bear solvents ≥2H
Able to bear the refrigerant , accord with GB6109.1—905.8Stipulate
Able to bear corona Voltage of initial corona >580V（10KHz）
Able to bear the high-frequency voltage >10min （10KHz2000V） |
|
